Advertisement
Coffee grounds disposal / drip drain set GIGA
1 Tools required
U
Drill
U
File
U
in addition for coffee grounds disposal
function
U
60 mm core drill bit
U
70 mm core drill bit
U
in addition for drip drain
U
Core drill bit of at least 35 mm
2 Installation
Preparation
T Switch off coffee machine.
T Unplug from the power socket.
T Remove the water tank.
T Open the service cover on the back of the
machine by pressing above the JURA logo.
T Push the red sliding catches completely to
the rear to close the bean containers.
T Turn the blue locking devices outwards.
T Remove both bean containers.
T Remove drip tray and coffee grounds
container.
T Carefully lay the coffee machine on its back.
Coffee grounds disposal function
E If you only want to install the coffee grounds
disposal function, use the drip tray for the
coffee machine.
T Drill hole in underside of drip tray (with 60
mm core drill bit).
T Deburr drilled hole with a file.
6
G2
T Fit coffee grounds funnel in drip tray.
T Drill hole for coffee grounds disposal in
T Remove round cover.
T Insert tube section and tighten.
T Set coffee machine upright again.
T Position coffee machine with tube section
Drip drain
E If you only want to install the drip drain or
T Drill hole for drain hose in tabletop (core drill
tabletop (70 mm core drill bit). For position,
see illustration on last page of these
instructions for use.
over hole in tabletop.
the drip drain along with the coffee grounds
disposal function, please use the drip tray
and cup grille supplied in this set. The valve
for the drip drain is already integrated in this
drip tray.
bit of at least 35 mm; distance from machine
of at least 40 mm). For position, see
illustration on last page of these instructions
for use.
Advertisement
