Dometic Harrier Inverter
8.9
Activating the sleep function
I
NOTE
The sleep function is only available in "Cooling" (
modes.
When the sleep function is activated, the inside and outside fan speeds are set to low
to reduce noise.
➤ Set the required temperature (chapter "Setting the temperature" on page 16)
and mode.
➤ Press the SLEEP button.
✓ The
symbol appears in the display.
The sleep function is activated.
➤ To deactivate the sleep function press the SLEEP button again.
I
NOTE
The sleep function is deactivated if the M button is pressed.
8.10
Operating the lights
Switching the light on/off with the control panel
➤ Briefly press the
Switching the light on/off with the remote control
➤ Press the
button to switch the lamps on or off.
EN
button to switch the lamps on or off.
Operating the roof air conditioner
) or "Heating" (
)
19