Using Your Carpet Washer - Russell Hobbs RHCC5001 Manual

Refresh & clean carpet washer 220-240 v~, 50/60hz, 500-600w
Table of Contents

Advertisement

USING YOUR CARPET WASHER

Prepare Your Carpet
IMPORTANT: Do not use the carpet washer as a dry vacuum.
Vacuum your carpet thoroughly. Ensure it is cleaned before you
shampoo.
Remove as much furniture from the room as possible. If unable to
remove the furniture, place plastic or foil under and around furniture
legs until the carpet has dried completely.
HELPFUL HINTS FOR CLEANING CARPET:
Use only the cleaning solution recommended by Russell Hobbs with
this carpet washer.
Do not over-saturate the carpet with cleaning solution while using the
carpet washer.
For heavily soiled areas, additional applications may be necessary.
Allow plenty of time for the carpet to dry thoroughly.
Wipe the cleaning solution from woodwork and furniture to prevent
any damage.
After the carpet is thoroughly dry, vacuum the carpet using a vacuum
cleaner with a revolving brush bar.
Before cleaning, determine where to start and end, making sure not to
walk over previously cleaned areas.
Try not to walk on the carpet until it is completely dry.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents