Insert The Sim And Microsd Cards - Motorola MOTO E5 GO User Manual

Table of Contents

Advertisement

Insert the SIM and microSD cards

To activate phone service, you might need to insert a SIM card, or this may have been
done for you. You can also add a microSD card, which is optional and sold separately.
Remove the back cover
To insert SIM and memory cards, remove the back cover.
Caution: Don't use tools to remove the cover—doing so may damage your phone.
Take off the back cover.
Put your finger in the notch at
the bottom corner of the back
cover and pry off the cover.
Caution: Do not pull the USB port
part to remove the back cover.
Back cover removal graphic. Remove the back cover starting at the small opening on the lower left corner [looking at it from the back]. Lift the battery up and out from the bottom.
Put in the cards
Caution: Make sure you use the correct size SIM card and don't cut the SIM card.
Insert the SIM card first, then insert an optional
microSD card.
2
1
SIM card insert graphic. After the battery is removed, the SIM card is inserted in the slot on the left with the clipped corner to the upper left. The SDcard is inserted in the right slot.
Note: If you need to remove the SIM card, follow the instructions below.
Push the SIM card down
from the top of the slot,
then pull the card from the
bottom to remove it
Get Started
1. SIM
(gold contacts
facing down)
2. microSD
(optional, sold
separately)
Nano SIM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents