Insert The Sim And Microsd Cards; Power On - Motorola Moto g stylus User Manual

tap the switch next to Removal reminder to turn it on. To change when
your phone sends the notification, tap Removal reminder.
» Record time and location of the last removal: To record when and
where you last removed the stylus, swipe up
then tap the switch next to Record last removal to turn it on.
Tip: Tap the recorded coordinates to view the location in Maps.
» Vibrate when inserted: To feel a quick vibration when the stylus is in
place, swipe up
inserted to turn it on.

Insert the SIM and microSD cards

To activate phone service, you might need to insert a SIM card, or this
may have been done for you. You can also add a microSD card, which is
optional and sold separately.
Note: Make sure you use the correct size SIM card and don't cut the SIM
card.
1 Insert the SIM tool into the SIM tray hole to pop out the tray.
Tip: Refer to the diagram below for tray and hole location.
2 Insert the SIM card with the gold contacts down, then gently push the
tray into the slot. Add a microSD card for additional storage.
Note: microSD card is optional, sold separately.
Nano SIM
SIM card insert graphic. Make sure the SIM card is inserted correctly.

Power on

Press and hold the Power button, then follow the prompts to get started.
Power on graphic. Press and hold the Power button until the screen lights up.
> Settings > Stylus, then tap Vibrate when
Get Started
Settings > Stylus,
>