Insert The Sim And Microsd Cards; Charge Up & Power On - Motorola MOTO Z3 User Manual

Insert the SIM and microSD cards

To activate phone service, you might need to insert a SIM card (or two), or this may
have been done for you. You can also add a microSD card, which is optional and sold
separately.
Put in the cards
Caution: Make sure you use the correct size SIM card and don't cut the SIM card. .
SIM card insert graphic. After the battery is removed, the SIM card is inserted in the slot on the left with the clipped corner to the upper left. The SDcard is inserted in the right slot.
Insert the nano SIM and memory cards.
Insert the SIM card with
With the phone facing
down, insert the SIM the gold contacts up.
Insert an optional microSD
tool into the tray hole
to pop out the tray. card (sold separately).
Push the tray back into your phone.
Charge up & power on
Charge your phone fully and turn the power on. Follow the screen prompts to get
started.
Battery in and power on graphic. Put the battery back in top down first and snap the cover on. After you charge the phone, press and hold the Power button until the screen lights up.
Charge up.
Before using your
phone, fully
Nano SIM
charge it with the
charger provided.
Power on.
Press & hold
Power until the
screen lights up.
Get Started