Network - Philips SignageSolutions 55BDL3102H User Manual

Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H monitors
1
3
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H monitors
1 2
6 7
11 12 13
16 17 18
21 22
Frame comp.
Choose to turn the frame compensation function on or off. If selected
{On}, the display will adjust the image to compensate for the width of
the display bezels in order to accurately display the image.
{On}
2
4
3 4 5
8 9 10
14 15
19 20
23 24 25
{Off}
Position
Switch on delay
Adjust the power-on delaying time (in seconds) allows a sequential
powering-on for each display by their ID number when multiple displays
are connected.
Auto ID
Position
The setup function enables setting up {Monitor ID} of connected
machine according to {H monitors} settings.
Example: H monitors sets as 4
1
5
9
13
Note: To use this function, serial connect all machines with RS-232 cable
and set their Network control port to RS-232 too.
Note: To use this function for DP 1.2 connectivity, the maximum
resolution only support 1920x1080/60Hz @ 4sets. For 4Kx2K/30Hz
resolution, only support 2 sets connectivity.

5.1.4. Network

Picture
Sound
Tiling
Network
Storage
General settings
Adv.
21
2 3
6 7
10 11
14 15
Network settings
Digital Media Rendere...
Network name
Mail Notification
FTP Setting
Clear Internet memory
55BDL3102H
4
8
12
16