Id Remote Control - Philips SignageSolutions 55BDL3102H User Manual

55BDL3102H

2.3.2. ID Remote Control

You can set the remote control ID when you want to use this remote
control on one of several different displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the ID
Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID Mode. The red LED
lights off.
Press the digit numbers [0] ~ [9] to select the display you want to
control.
For example: press [0] and [1] for display No.1, press [1] and [1] for
display No.11.
The numbers available are from [01] ~ [255].
2. Not pressing any button within 10 seconds will exit the ID Mode.
3. If an error pressing of buttons other than the digits occured, wait
1 second after the red LED lights off and then lights up again, then
press the correct digits again.
4. Press [ENTER] button to confirm. The red LED blinks twice and
then lights off.
NOTE:
• Press [NORMAL] button. The green LED blinks twice, indicating the
display is in normal operation.
• It is necessary to set up the ID number for each display before
selecting its ID number.
• Use " F " (pause) key on the remote controller to freeze the screen.
Use " I " (play) key on the remote controller to unfreeze the screen.
• The "freeze" feature only can be adopted on "real" video sources
like VGA, AV, YPbPr, HDMI, DVI, DP.
• Any operation on the remote controller or video mode change will
unfreeze the screen.
8