General Settings - Philips SignageSolutions 55BDL3102H User Manual

5.1.6. General settings

Picture Menu language
Sound
Monitor Group
Tiling
Monitor ID
Network Eco mode
Storage
Auto search
General settings Clock
Adv. Scheduling
Sleep timer
OneWire
Local KB lock
RC lock
Menu language
Choose language used for OSD menus.
Monitor group
Adjust the group range between 1 to 255. The default setting is 255.
Monitor ID
Adjust the ID number for controlling the display via the RS232
connection. Each display must have a unique ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255. The default setting is 1.
Eco mode
Set this display to reduce the power consumption automatically.
Note: Factory default setting is "low power standby", but user could not
reset it to default after setting Eco mode to"Normal" by "Factory reset"
in MENU. However, user can still change the ECO mode back to "low
power standby" manually.
Auto search
Choose to let this display detect and display available signal sources
automatically.
Clock
Set the current date and time for the display's internal clock.
Scheduling
This function allows you to program up to 7 different scheduled time
intervals for this display to activate.
You can set:
• Which input source the display will use for each scheduled activation
period.
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
Notes:
• We recommend you to set up current date and time in the {Clock}
menu before using this function.
• After changing the {Clock} option in the {General settings} menu,
you need to set this {Scheduling} again.
Picture
Sound
Tiling
Network
Storage
General settings
Adv.
1. There are 7 schedule can be set. Go to
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
Source
2. Go to and choose input source.
If {Source}  {USB playlist} is chosen. You need to set playliist.
If {Source}  {Internet} is chosen. You need to set URL address.
If {Source}  {USB AutoPlay} is chosen. You need to create a folder
named "philips" in the USB and put all media files into the specific
folder for auto play.
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
23
55BDL3102H
Menu language
Monitor Group
Monitor ID
Eco mode
Auto search
Clock
Scheduling
Sleep timer
OneWire
Local KB lock
RC lock
Status
and choose
Status Off
On
Source
On time
Off time
Repeat modes
Playlist setting
Slideshow durations
Status USB playlist
Source
CVBS
On time YPbPr
Off time
VGA
Repeat modes HDMI 1
Playlist setting HDMI 2
Slideshow durations
DVI-D
DisplayPort
Card OPS
Internet
SmartCMS
On
.