Domlux; Cool Motion - MaxxMar Domlux Operation And Programming Instructions

The following operation and programming instructions
apply to the following New Generation Maxx Motors:

Domlux

New and Quieter Generation
Smart Motor with Bluetooth
Motor with Transformer and Remote
Control plugs into Electrical Outlet
24V DC Low Voltage with
Transformer
1. Reference
Jog Down/Favourite position 1
Types of Button Presses
Click Press and release
Hold Press and hold for
specified time
Double-Click Two clicks in less than
3/4 of a second
Unless noted, all commands are sent from a remote control to a motor, and will only have effect if the remote control's
active channel has been paired with the target motor. (See Pairing Process below)
2. Basic Operations
Command
Go-Up
Go-Down
Stop
Step-Up
Step-Down
Go-To-Favorite-1
Go-To-Favorite-2
Next-Channel2
1- The motor Will stop on button release if the not yet set.
2- This command is not sent to the motor, and affects only the remote.

Cool Motion

New and Quieter Generation
Smart Motor with Bluetooth
Rechargeable Internal Battery
Motor with Remote Control
12V DC with battery charger
Down
Channel
Selection
Description
Move all the way to the upper limit.
Move all the way to the lower limit.
Stop ongoing motion.
Move the motor up a small amount.
Move the motor down a small amount.
Move the motor to favourite position 1.
Move the motor to favourite position 2.
Cycle to the next channel (or group of channels) on the
remote, making it active.
Ch: 3
Ch: 2
Ch: 1
Up
1
1
6
HWM-10 & HWM-20
New and Quieter Generation
Smart Motor with Bluetooth
Hardwire - 110V AC Motor
Note: ALL 4 MOTORS - DOMLUX,
COOL MOTION, HWM-10 & HWM-20
WORK WITH BLUETOOTH
Ch: 4
Ch: 5
Ch: 6
Stop
Set
Jog Down/
Favourite
position 2
Key Combination
Click UP
Click DOWN
Click STOP
Click LEFT
Click RIGHT
Hold LEFT for 2 seconds
Hold RIGHT for 2 seconds
Click CHANNEL