Table of Contents
Advertisement
7
Buzzer Settings
Do not use excess force when performing operations. Failure to comply will result in damage due
to breakage or deformation.
Caution
Do not use sharp-pointed objects to perform operations. Failure to comply may result in damage
and inoperative switches or hinder contact between contact parts.
Buzzer Unit
Bottom View
DIP Switch Confi guration Table
DIP Switch
Buzzer
Sound
1
No. 1
OFF
No. 2
ON
No. 3
OFF
No. 4
ON
■ Indicates the position of the DIP
switch. (Down to turn "ON".)
Sound Pattern
2
Rapid intermittent beep
OFF
(call sign)
Continuous beep sound
OFF
Rapid hi-low
ON
Sweep sound
ON
DIP Switch
3
OFF
ON
Note: DIP Switch 4 is not used.
The factory default settings have all of the DIP
switches in the "OFF" (Up) position.
– 9 –
Volume
Normal
Noise reduction
Advertisement
Table of Contents
