Specifications - Patlite LR6-IL Operation Manual

10
Specifi cations
General Specifi cations
Model
Rated Voltage
Voltage tolerance range
Rated current consumption
Rated power consumption
Inrush current
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Installation location
Installation direction
Protection Rating
Environmental
conditions
Insulation resistance
Withstanding voltage
Mass (Tolerance: ±10 %)
Exterior dimensions
Compliance standards
Notes
Function
IO-Link revision
Transmission speed
Communication
Minimum cycle time
Specifi cation
Processing data
Vendor ID
Device ID
The requirements in each law and regulation are only included in the language designated by each law and regulation.
Check the instruction manuals published in each language.
Standard
Maximum
Standard
Maximum
5 MΩ or more at 500 V DC between charging parts and non-charging metal parts
The brightness of each LED may differ according to the characteristics of the LED or color variations in each
length
LR6-3ILWMNW-RYG
18 V DC to 30 V DC
10 A / 0.3 msec
-20 °C to +50 °C
90 % RH or less; No condensation
-30 °C to +60 °C
90 % RH or less; No condensation
Upright direction
IP65, NEMA TYPE 4X, 13
When installed in the upright direction
1 minute at 500 V AC between charging parts and non-charging metal parts
3
See " Names and Dimensions"
UL 508, CSA-C22.2 No. 14, EMC Directive (EN 61000-6-4, EN 61000-6-2)
RoHS Directive (EN 50581), FCC Part 15 Subpart B Class A
KC (KN 61000-6-4, KN 61000-6-2)
individual LED or the product.
- LED control
- Buzzer control
- Operational mode/pattern settings
- LED fl ashing/intermittent
- Buzzer Pattern Settings
COM2 (38.4 kbps)
6 byte / 0 byte (input from master / output to master)
– 23 –
24 V DC
170 mA
200 mA
4 W
5 W
Indoor
0.38 kg
1.1
8 ms
763
80001