Table of Contents
Advertisement
1
Read this First
The safety precautions that should always be followed in order to prevent injury to user or other individuals as well as
prevent damage to property are described below.
The level of injury or damage caused by ignoring these safety precautions and using the product improperly is categorized
and described below.
This icon indicates an action with the potential to
Warning
cause death or serious injury.
Request the installation and wiring be accompanied by a professional contractor. If installation is done improperly, it
may result in fi re, electric shock, falling, or malfunction.
Adhere to the items below to prevent a short or damage.
- Be sure that the product is disconnected from the power source when changing, replacing or adding a unit.
- Use this product in the proper state. (Replace parts such as the body or each unit if damaged.)
Avoid long exposure to the Buzzer sound from a close distance. Failure to observe this may lead from irritation to
permanent damage to the ears. (When Buzzer Unit is used)
In order to maintain protection of this product against dust and waterproofi ng performance, be sure to use the head
cover, LED unit and buzzer unit in the condition that it was originally attached.
To ensure the waterproofi ng performance of this product, do not remove the O-ring or the waterproof packing. Dust
and waterproofi ng performance will decrease.
When removing covers or packing from the equipment, which is attached to this product, be careful not to snag the
product. Failure to comply may result in damage to the product.
To ensure proper safety while using the signal tower, observe the following:
- Perform periodic pre-maintenance.
- As a precaution against problems occurring, use this product together with other equipment.
Be sure to prevent electrostatic damage due to discharge when working with this product for wiring, exchanging
units, setting up parameters, etc. by discharging static electricity on your body, etc.
(To prevent damage from static electricity, touch hands or other body parts to metals or an earth ground to discharge
the body from static charge.)
Use a soft cloth, etc., dampened with water to wipe the main unit. If wiped with chemicals outside water (thinner,
benzine, gasoline, oil, etc.), product damage may occur.
To ensure safety when this product is installed onto equipment, observe the following:
- Do not remove parts beyond those designed to be removed from this product.
- Do not modify or disassemble this product.
- Use only the specifi ed replacement parts listed in this document.
2
Model Number Confi guration
LR
Assembly Model
Unit Model
LR
(Body Unit)
Unit Model
LR
(Body Unit)
6
Φ60
WM
Direct Mount / M12 Connector (Mounting with 3 Hexagon Bolts)
WC
Direct Mount / M12 Connector (Mounting with M30 Nut)
Safety Precautions
Model
Tiers
Functionality
6
-
3
6
-
6
-
3
Tiers
IL
IO-Link
Caution
Warning
Caution
Notice
Extended
Mounting/
Wiring
IL
WM
IL
WM
IL
WC
N
W
LED Color: R (Red) / Y (Amber) / G (Green)
(From top to bottom)
– 2 –
This icon indicates an action with the potential to
cause injury, physical loss or damage.
Body
Buzzer
Color
N
W -
N
W
N
W
No Flashing
Off-white
LED Unit
Color
RYG
Advertisement
Table of Contents
