Advertisement
5
Designate Left-Right speaker
Set the Left–Right switch (9) to designate whether the active
speaker is located to your right or left (as you face the speakers).
This ensures the music is recreated as it was recorded.
6
Install the Grills
Grills come in individual plastic bags. Simple magnetic mounting (no or little alignment
necessary). Can go either way such that the "Vanatoo" logo is upright on the bottom.
7
Listen to Music!
Turn the power switch to the ON position (2). The blue LED (9) will light up within
5 seconds to indicate power to the unit. In most applications you can set the T1E
volume control to 100% and adjust the volume up/down from your source (Computer,
Bluetooth device, etc).
8
Remote Control
The included IR Remote Control is especially handy when your T1E's are used with a
TV, or for switching sources, adjusting bass and treble, etc. Note that you must hit the
"Enable" button to enable the other buttons inside the rectangular box for 15 seconds.
9
Optional Settings
The T1E has a lot of setup options, such as enabling the speakers to play mono,
disabling sleep mode, varying the LED brightness, connecting a subwoofer and
alternate bass profiles for room placement. Go to www.vanatoo.com/support/
downloads to download the user manual for a full description of the T1E and its
setup options.
CONGRATULATIONS!! That's it! We hope you enjoy your
Vanatoo Transparent One Encore powered speakers.
For additional setup up information, connectivity options, and the troubleshooting
guide, check out the Transparent One Encore Owner's Guide or visit us at www.
vanatoo.com.
Contact Us
Email: support@vanatoo.com
"Vanatoo" is a registered trademark, "Vanatoo Technology Serving Art" logo and "Transparent One Encore" are trademarks of Vanatoo LLC
Copyright 2018 Vanatoo LLC, all rights reserved
Advertisement
