Precautions In Starting, Commissioning And Maintenance; Precautions While Operating; Precaution While Using Battery - AC&T System ETOS-XP Series User Manual

[Precautions in Starting, Commissioning and Maintenance]

 Do not disassemble or modify the module. It may cause failure, breakdown, injury or fire.
 Be sure to shut off the power supply from the outside before installing or removing the
module. Failure to do so may cause electric shock or module breakdown or failure.
 Do not touch the terminals while power is on. It may cause electric shock or breakdown.
 Be sure to shut off the power supply from the outside before cleaning, terminal screws, or
module mounting screws. Failure to do so may cause electric shock or module failure or
breakdown. Loosened screws may cause a drop, short circuit or breakdown. If you tighten the
screws too much, it may cause a drop, short circuit or breakdown due to damage to the screw
or module.
 When attaching or detaching the module (card), take measures to prevent the module from
damages such as dropping and store it. It may cause breakdown due to parts damage following
an impact.

[Precautions while Operating]

 When controlling the ETOS-XP series in operation, read this user's manual thoroughly and
check the safety. Incorrect parameter setting or program change may cause breakdown of the
system, damage to the machine or accident.

[Precaution while Using Battery]

 The external battery must be replaced periodically with the primary battery. Replace the
external battery in the order described in the manual.
 Do not apply shocks or heat, do not solder the electrodes, and do not connect (short-circuit)
the positive and negative poles for any reason. It may shorten the life of the battery, and
may cause heat, explosion, fire or injury due to ignition.
 If an external battery is not used for a long time, remove the battery. Battery life may be
shortened.
 However, if the use of user memory and log storage are required, check whether the battery
is disconnected or not after accurate identification. It is because memory may be initialized
if the battery is removed.
 If the battery is discharged by leaving the product for a long period of time, check and
reset the internal user memory and RTC value before connecting to the system after battery
replacement.
Precautions
Precautions
Precautions
- 4 -