INSTALLATION AND WIRING
3.
This chapter explains specifications of power supply and connector pins required for the
installation and wiring of ETOS-XP Series.
3.1.
Power Supply and Connector of ETOS-100XP/150XP
This section describes the specifications of power supply and connector of ETOS-100XP / 150XP.
3.1.1. Specifications of Power Supply
ETOS-100XP / 150XP accepts AC100 ~ 240V power input through the power connector in front of
the product as shown in the following picture.
[ETOS-100XP]
*
Input power supply: AC 100V ~ 240V (Free Voltage), 50/60 Hz
*
Power supply must be connected to Frame Ground.
3.2.
Power Supply and Connector of ETOS-500XP
3.2.1. Power Supply Specifications
ETOS-500XP accepts AC100 ~ 240V power supply input through the rear power supply connector of
the products in the following picture.
*
Input power supply:
AC 100V ~ 240V (Free Voltage), 50/60 Hz
90 ~ 130VDC (130W)
*
Power supply must be connected to ground (F.G).
[ETOS-150XP]
[ETOS-500XP]
- 25 -