2.4.
Cable Specification
This section is the standard for the cables used for communication in ETOS-XP. If you do not
use the recommended cable (especially in long distance communication), be careful because
communication may become unstable or communication may be impossible.
2.4.1. RS-232 / RS-422 / RS-485 Cable
When communicating using RS-422 or RS-485, twisted pair shield cable for RS-422 must be used
considering communication distance and communication speed. The following table lists the
recommended cable specifications.
Electrical Feature
Item
Conductor resistance
Withstand voltage (DC)
Insulation Resistance
Capacitance
Characteristic Impedance
Appearance
Item
No. of Core Wire
Specification
Conductor
Configuration
External Diameter
Thickness
Insulator
External Diameter
Unit
Ohm/km
59 or less
V/1min
Resistant for 1min at 500V
MEGA Ohm-km
1,000 or more
pF/m
45 or less `
Ohm
Unit
Pair
AWG
NO./mm
Mm
Mm
Mm
- 16 -
Feature
Room temperature
Room temperature
120 (±12)
Single Wire
Stranded Wire
2
22
1/0.64
0.64
0.55
1.64
Condition
In the air
1 KHz
10 MHz
2
22
7/0.254
0.76
0.55
1.76