General Safety Instructions - GE CRxFlex Operating Manual

General safety instructions


If an image plate has not been used for more than 48 hours or if an image plate has
been exposed to an exceptionally high X-ray dose you must re-erase the image plate
before re-using it in order to prevent ghost images from interfering with the image of
interest.

Make sure that the CRxFlex is constantly monitored in order to avoid inappropriate
handling, especially by children.

Only trained service personnel must make repairs. Only authorized service personnel
must make changes to the CRxFlex.

If there is any visible damage to the CRxFlex casing, do not start nor use the
CRxFlex.

Do not override or disconnect the integrated safety features.

Do not apply excessive shock or vibration to the CRxFlex during operation. This may
decrease the image quality. Neither should the CRxFlex be moved during operation.

Do not allow the CRxFlex to be subject to excessive shock or vibration during
operation (e.g. putting cassettes on the top of the device, due to unstable ground
(e.g. vibration of nearby equipment or footsteps. This may decrease the image
quality. Neither should the CRxFlex be moved during operation.

Switch off the CRxFlex before performing any maintenance work or repairs.

Disconnect the CRxFlex from the mains before making repairs or performing any
maintenance activities during which live electrical components may be exposed.

As is the case for all technical devices, the CRxFlex must be operated, cared for and
serviced correctly. A regular quality control is recommended.

If you do not operate the CRxFlex correctly or if you do not have it serviced correctly,
the manufacturer is not liable for resulting disturbances, damages or injuries.

If you notice conspicuous noise or smoke, disconnect the CRxFlex immediately.

Do not pour water or any other liquid over the CRxFlex.

Perform no other operations on the CRxFlex than those described in this document.

Switch the system off before moving it. When reaching the new position, switch the
system on again.

Do not transport the CRxFlex without packaging.
CRxFlex Operating Manual V1.1 21