Equipment Classification; Connectivity; Training - GE CRxFlex Operating Manual

Equipment Classification

The CRxFlex is classified as following:
Class I equipment
Water ingress
Cleaning
Operation

Connectivity

The CRxFlex is connected to the workstation via network connection and uses the DICOM
protocol to communicate with the workstation.

Training

The user must have received adequate training on the safe and effective use of the product
before attempting to work with it. Training requirements may vary from country to country.
The user should ensure that training is received in accordance with local laws or regulations
that have the force of law. Your local representative can provide further information on
training.
The user must note the following information of this manual:

Intended Use

Intended User

Safety Directions
12
Equipment in which protection against electric shock does not rely on
basic insulation only, but includes a power supply cord with protective
earth conductor. For earth reliability always plug the main power cord
into an earthed mains power outlet.
The CRxFlex does not have protection against ingress of water.
See section on Cleaning of the Flex and Cleaning of Image Plates.
Continuous operation
CRxFlex Operating Manual V1.11