Table of Contents
Advertisement
10.6 UNPLUGGING AUGER
DELIVERY TUBE
IMPORTANT
Do not operate the auger when it is plugged with
excess seed or is hindered from moving by a foreign
object. Continued operation can cause damage.
If the auger becomes plugged, follow this
procedure:
1. Stop the engine and remove the ignition key.
Place a lock-out tag on the control box to
prevent accidental starting of the conveyor.
2. Open the lower access door at the bottom of
the auger and remove any excess seed or
obstruction.
3. Close and secure the lower access door.
42
Advertisement
Table of Contents
