Protecting Images - Protect - Sony DSC-V3 Fall 2005 Operating Instructions Manual

Protecting images
— Protect
This function protects images against
accidental erasure.
Control button
MENU
• Note that formatting the recording medium
erases all the data in the recording medium
even if images are protected, and these images
cannot be recovered.
• It may take some time to protect the images.
In single-image mode
 Set the mode dial to
 Display the image you want to
protect with /.
 Press MENU.
Mode dial
The menu appears.
 Select  (Protect) with /,
then press .
The displayed image is protected. The
 (protect) indicator appears on the
image.
60min
Protect
Exit
BACK/NEXT
 To continue and protect other
images, select the desired
image with /, then press .
To cancel the protection
Press  again in step  or . The 
indicator disappears.
.
VGA
2/9
101
In index mode
 Set the mode dial to
press (index) to display
the index (nine-image) screen.
Press (index) twice to display a
sixteen-image index screen.
 Press MENU.
The menu appears.
 Select  (Protect) with /,
then press .
 Select [Select] with /, then
press .
 Select the image you want
to protect with ///, then
press .
The green  indicator appears on the
selected image.
•
SELECT MENU TONEXT
 Repeat step  to protect
other images.
 Press MENU.
, then
87