Setting The Date And Time - Sony DSC-V3 Fall 2005 Operating Instructions Manual

Setting the date and time

Mode dial
1
 Set the mode dial to
• To change the date and time, set the
mode dial to SET UP, select [Clock
Set] in (Setup 2) (pages 51 and
2
142), and perform the procedure

from step .
• You can also carry out this operation when the
mode dial is set to P, S, A, M, SCN,
18
POWER
2
 Press POWER to turn on the
.
power.
The POWER lamp (green) lights up and
the Clock Set screen appears on the LCD
screen.
or .
Clock Set
Y/M/D
M/D/Y
D/M/Y
2004 / / 12 : 00
1 1 OK
AM
Cancel
Clock Set
2004 / / 12
1 1
3
 Select the desired date display
format with / on the control
button, then press .
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery (page 144),
which provides the power for saving the time
data, ever becomes low, the Clock Set screen
will appear again. When this happens, reset the
date and time, by starting from step  above.
Y/M/D
M/D/Y
D/M/Y
: 00
OK
AM
Cancel