Sony DSC-V3 Fall 2005 Operating Instructions Manual page 128

Symptom
You cannot insert the date or print
images in the index mode.
The paper size you want to print on
does not appear.
"---- -- --" is printed on the date-
inserted part.
You cannot print with the current
paper size setting of the printer.
You cannot perform other operations
when printing is stopped.
Others
Symptom
Your camera does not work.
The power is on, but the camera does
not work.
You cannot identify an indicator on
the screen.
The lens gets fogged.
The camera becomes warm when you
use it for the long time.
The lens does not move when you
128
turn off the camera.
Cause/Solution
• Consult with the printer manufacturer whether the printer provides date function or index print
function or not.
• The date may not be inserted in the index mode depending on the printer. Consult with the printer
manufacturer.
• Check with the printer manufacturer whether the printer supports the paper size you want to print on.
• The images that do not have the recording date data cannot be printed with the date inserted. Set
[Date] to [Off] and print the image.
• If the printer paper was changed to paper of a different size after the camera was connected to the
printer, disconnect and connect the USB cable again.
• The printing setting of the camera differs from the printer setting. Change the paper size setting of
the camera (pages 92 and 94) or change the printer setting.
• The printer is performing the printing stop processing, so wait for this processing to finish. (This
processing may take some time depending on the printer.)
Cause/Solution
• You are not using an "InfoLITHIUM" battery pack. Use an "InfoLITHIUM" battery pack (page
146).
• The battery level is low. (The  indicator appears.) Charge the battery pack (page 13).
• Connect the AC Adaptor securely to the DC IN jack of your camera and to a wall outlet (wall socket)
(page 16).
• The built-in microcomputer is not working properly. Disconnect, and then, after one minute,
reconnect all power sources and turn on the camera. If this does not work, press the RESET button
inside the battery/"Memory Stick"/CF card cover with a fi ne-tipped object, then turn the power on
again. (This will clear the date and time settings, etc.) (page 119)
• Check the indicator (pages 149 to 153).
• Moisture condensation has occurred. Turn off the camera and leave for about an hour at room
temperature for the moisture to evaporate before use (page 143).
• This is not a malfunction.
• The battery pack is discharged. Replace the battery pack with a charged battery pack (page 13) or
use the AC Adaptor (page 16).