Sensor/Transmitter Module; Factory Calibration - AMC SIR Series Instruction Manual

AMC-SIR Refrigerant Gas Sensor/Transmitter

2.2 SENSOR/TRANSMITTER MODULE

Sensor/transmitter unit order number. ............
Sensor/transmitter serial number...................
Power Supply Requirement..........................
Current Requirement...................................
Operating Temperature ..............................
Relative Humidity ......................................
Signal Linearity..........................................

2.3 FACTORY CALIBRATION

Gas Type..................................................
Zero Gas, at 4mA signal..............................
Gas Concentration at 20mA signal
Calibration Adapter Part Number..................
Calibration Kit Part Number.........................
Note:
All Armstrong Monitoring systems must be installed and maintained according to
instructions to assure proper operation. Only qualified technicians should install and
maintain the equipment. For re-calibration extended warranty program information
please call 1-800-465-5777.
14 to 28VDC
70mA average, 140mA max
-20° to +40° C
0 to 95% RH, non-condensing
Linear to the concentration of gas
AMC-FL1
AMC-C1-FL1
4