Product Information; Transmitter; Factory Settings - AMC -360-IREP Instructions Manual

AMC-360-IREP 0-100% LEL Methane Sensor/Transmitter

2 PRODUCT INFORMATION

2.1 TRANSMITTER

Transmitter Unit Order Number ..........................................
Transmitter Part Number....................................................
Transmitter Serial Number ................................................
Sensor Part Number/WARRANTY.......................................
Sensor Serial Number ......................................................
Power Supply Requirement ...............................................
Signal Output Load ..........................................................

2.2 FACTORY SETTINGS

Gas Type ......................................................................
Zero Gas, at 4 mA signal ..................................................
Gas Concentration at 20 mA signal ....................................
Calibration Adapter Part Number........................................
Note:
All Armstrong Monitoring equipment must be installed and maintained according to
instructions, to ensure proper operation. Only qualified personnel should install and
maintain the equipment.
12 to 26 VDC @ _____ mA
iv
/
maximum 250 ohms
Methane