Connecting The Camera To Your Computer - Sony DSC-P100/P120 Operating Instructions Manual

Connecting the camera to
your computer
a Insert the "Memory Stick" with
the images you want to copy
into the camera, then close the
battery/"Memory Stick" cover.
b Open the DC IN jack cover, and
connect the AC Adaptor
(supplied), then plug the
adaptor into a wall outlet (wall
socket).
1
AC Adaptor
• When you copy images to your computer using
the battery pack, copying may be failed or
cause data corruption by battery shutoff. We
recommend that you use the AC Adaptor.
c Set the mode dial to
on your computer and the
camera.
• You can also carry out this operation when the
mode dial is set to SET UP.
d Connect the USB multi cable
(supplied) to the multi
connector of the camera.
• Place the camera with the LCD screen facing
upwards.
e Connect the USB multi cable
to your computer.
2 To a wall
outlet (wall
socket)
• When you use a desktop computer, we
recommend that you connect the USB multi
cable to the USB connector on the rear panel.
• When using Windows XP, the AutoPlay wizard
automatically appears on the desktop. Proceed
. Turn
to page 85.
USB Mode
Normal
Switch on
"USB Mode Normal" appears on the
LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
* During communication, the access
indicators turn red. Do not operate the
computer until the indicators turn white.
• If "USB Mode Normal" does not appear in step
5, press MENU, select [USB Connect], and
set it to [Normal].
Access
indicators*
MENU
83