Sony DSC-P100/P120 Operating Instructions Manual page 114

(Setup 1)
1
Item
LCD Backlight
Beep
Language
A
(Setup 2)
2
Item
File Number
USB Connect
Video Out
Clock Set
114
Setting Description
x
Bright / Normal / Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy
to see when using the camera outdoors or in other bright locations, but also uses up the battery
Dark
charge faster. Displayed only when you are using the camera with the battery pack.
Shutter – Turns on the shutter sound when you press the shutter button.
x – Turns on the beep/shutter sound when you press the control button/ press the shutter button.
On
– Turns off the beep/shutter sound.
Off
— Displays the menu items, warnings and messages in selected language.
Setting Description
x – Assigns numbers to files in sequence even if the "Memory Stick" is changed or the recording
Series
folder is changed.
– Resets the file numbering and starts from 0001 each time the folder is changed. (When the
Reset
recording folder contains a file, a number one higher than the largest number is assigned.)
PictBridge / PTP / Switches the USB mode when connecting with a computer or a PictBridge compliant printer
x
Normal using the USB multi cable (pages 70, 81, 83 and 92).
NTSC – Sets the video output signal to NTSC mode (e.g., USA, Japan).
PAL – Sets the video output signal to PAL mode (e.g., Europe).
OK / Cancel Sets the date and time (pages 16 and 45).