Using The Ac Adaptor; Using Your Camera Abroad - Sony DSC-P100/P120 Operating Instructions Manual

Using the AC adaptor

DC IN jack cover
1
DC plug
, Open the DC IN jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
Open the cover in the arrow direction as
illustrated above. Connect the DC plug with
the v mark facing the LCD screen side.
• Connect the AC Adaptor to an easily accessible
wall outlet (wall socket) close by. If any trouble
occurs while using the adaptor, immediately
shut off the power by disconnecting the plug
from the wall outlet (wall socket).
14
AC
Adaptor
Power cord
2
(mains lead)
, Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
• After using the AC Adaptor, disconnect it both
from the DC IN jack of the camera and from a
wall outlet (wall socket).
• The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (wall socket) even if the set itself has
been turned off.
Using your camera
abroad
Power sources
2 To wall outlet
You can use your camera in any country or
(wall socket)
region with the AC Adaptor (supplied)
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a], if necessary, depending on the design of
the wall outlet (wall socket) [b].
1
AC-LS5/LS5B
• Do not use an electronic transformer (travel
converter), as this may cause a malfunction.