Setting The Date And Time - Sony Cyber-shot DSC-P10 Operating Instructions Manual

Setting the date and time

Mode dial
1
, Set the mode dial to
• You can also carry out this operation when the
,
mode dial is set to SCN,
• To change the date and time, set the mode dial
to SET UP, select [Clock Set] in
(pages 39 and 105), and perform the procedure
from step 3.
POWER
2
. , Press POWER to turn on the
power.
The POWER lamp (green) lights up and the
or .
Clock Set screen appears on the LCD
( )
Setup 1
screen.
1
Clock Set
Y/M/D
M/D/Y
D/M/Y
2003 / 1 / 1 12 : 00
OK
AM
Cancel
OK
POWER button
Clock Set
2003 / / 1 12
1
OK
3
, Select the desired date display
format with v/V on the control
button, then press z.
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery, which
provides the power for saving the time data, is
ever fully discharged (page 108), the Clock Set
screen will appear again. When this happens,
reset the date and time, by starting from step 3
above.
Y/M/D
M/D/Y
D/M/Y
: 00
OK
AM
Cancel
15