Sony Cyber-shot DSC-P10 Operating Instructions Manual page 93

Symptom
You cannot copy images.
After making a USB
connection, "Image
Transfer" does not
automatically start.
The image cannot be
played back on a
computer.
The image and sound are
interrupted by noise when
you view a movie on a
computer.
You cannot print an
image.
An error message appears
when you set the supplied
CD-ROM in your
computer.
"Memory Stick"
Symptom
You cannot insert a
"Memory Stick."
Cause
• The camera is not correctly connected to your
computer.
• You are not using the correct copy procedure for
your OS.
—
—
—
—
—
—
• You are playing back the movie directly from
Memory Stick .
" "
—
—
• The computer display is not set correctly.
Cause
• You are inserting it backwards.
Solution
p Connect the camera and your computer correctly using the
supplied USB cable (page 78).
p Follow the designated copy procedure for your OS (pages 79
and 85).
p If you use the "Image Transfer" software, see page 79.
p If you are using the "ImageMixer Ver. 1.5 for Sony" application
software, click on HELP.
p Select [Launch Image Transfer automatically when your
camera, etc., is connected.] at [Basic] setting (page 80).
p Make a USB connection when the computer is turned on
(page 78).
p If you are using the "ImageMixer Ver. 1.5 for Sony" application
software, click on HELP.
p Consult the computer or software manufacturer.
p Copy the movie to the hard disk of your computer and then play
the
back the movie from the hard disk (pages 79 and 85).
p Check the printer settings.
p Click on the HELP for the "ImageMixer Ver. 1.5 for Sony"
application software.
p Set the computer display as follows:
Windows: 800 × 600 dots or more
High Color (16 bits, 65,000 colors) or more
Macintosh: 800 × 600 dots or more
32,000-color or more
Solution
p Insert it from the right side (page 17).
93