Sony Cyber-shot DSC-P10 Operating Instructions Manual page 103

Item Setting
(Metering Mode) Spot / xMulti
WB (White Bal) WB
(Interval) 1/7.5 / 1/15 / x1/30 (NTSC)
1/6.3 / 1/12.5 / x1/25 (PAL)
(P.Quality) xFine / Standard
PFX (P.Effect)
Solarize / B&W (DSC-P8 only)/ Sepia
/ Neg.Art /xOff
When the mode dial is set to
Item Setting
Folder OK / Cancel
Protect
—
DPOF
—
Slide
Interval
Image
Repeat
Start
Cancel
Resize
5.0M (DSC-P10/P12)/ 3.1M / 2.0M
(DSC-P8)/ 1.2M / VGA / Cancel
Rotate
(clockwise) / OK / Cancel
Divide OK / Cancel
/ / xAuto
/ / /
/
(counter clockwise)
Description
Matches the exposure to the subject you want to shoot (page 47). Set the metering
region.
Sets the white balance (page 49).
– Selects the Multi Burst shutter interval in NTSC mode.
– Selects the Multi Burst shutter interval in PAL mode.
• The shutter interval settings differ depending on the setting of the [Video Out]
item in the SET UP settings (page 106).
Records images with fine/standard quality (page 40).
Sets the image special effects (page 57).
Description
Selects the folder containing the image you want to play back (page 58).
Protects images against accidental erasure (page 63).
Marks/unmarks the print (DPOF) mark on still images you want to print (page 65).
– Sets the slide show interval (page 60). (Only in single-image mode.)
x3 sec / 5 sec / 10 sec / 30 sec / 1 min
– Sets the range of the playback images.
xFolder / All
– Plays back images repeatedly.
xOn / Off
– Starts the slide show.
– Cancels the slide show.
Changes the recorded still image size (page 65). (Only in single-image mode.)
Rotates the still image (page 61). (Only in single-image mode.)
Divides a moving image (page 72). (Only in single-image mode.)
103