Table of Contents
Advertisement
4
INSTALLATION
4.1 Delivery
The appliance is delivered in a heavy-duty cardboard carton. Lay the
carton on the floor with the writing the correct way up.
4.2 Contents
Contained within the carton is:
- the appliance;
- the wall mounting bracket and stand-off brackets;
- template;
- an accessories pack containing the appliance service valves and
washers;
- the instruction pack containing the installation & servicing instruc-
tions, user instructions and a 3-amp fuse.
4.3 Unpacking
At the top of the carton pull both sides open – do not use a knife – un-
fold the rest of the carton from around the appliance, carefully remove
all protective packaging from the appliance, and lay the accessories
etc. to one side.
4.4 Preparation for mounting the appliance
The appliance should be mounted on a smooth, vertical, surface,
which must be capable of supporting the full weight of the appliance.
Care should be exercised when determining the position of the appli-
ance with respect to hidden obstructions such as pipes, cables, etc.
When the position of the appliance has been decided – using the
template supplied – carefully mark the position of the wall-mounting
bracket and flue-hole (if applicable).
b
Position the cartoon template and trace the two upper holes Ø
8 mm. Trace the two lower holes Ø 8 mm at a distance from the
upper holes of 579 mm.
Fix the stand-off brackets (the stand-off brackets should only
be used if the flue is exiting to the rear).
b
Attach the wall mounting bracket.
380
320
346
MAXIMUM FLUE LENGTHS
Flue system
Concentric Horizontal
Concentric Vertical
Twin flue
4.5 Fitting the flue
The top flue outlet permits both horizontal and vertical flue applications
to be considered, alternatively, the Vokèra twin flue system can be
utilised if longer flue runs are required.
Concentric horizontal flue
(For concentric vertical flue, see pag. 10).
(For twin flue applications, see pag. 11).
The appliance can be used with either the Vokèra 60/100mm concen-
tric Uni-flue system or the optional Vokera twin flue system.
NOTE
These instructions relate only to the Vokèra Uni-Flue 60/100mm con-
centric flue system. The appliance flue outlet elbow can be rotated
through 360º on its vertical axis. In addition the flue may be extended
from the outlet elbow in the horizontal plane. A reduction must also be
made to the maximum length (see table below) when additional bends
are used.
20
Reduction for additional bends
Bend
Reduction in maximum flue length for each bend
45° bend
90° bend
Horizontal flue terminals and accessories
Part no.
Description
2359029
Horizontal flue kit
2359119
Telescopic flue kit
2359069
750 mm extension
2359079
1500 mm extension
2359089
Telescopic extension
2359049
45º bend (pair)
2359059
90º bend
529
Wall bracket (5)
Using the template provided (A), mark and drill a 125mm hole for the
passage of the flue pipe. The hole should have a 1º drop from the ap-
pliance to outside, to eliminate the possibility of rainwater entering the
appliance via the flue.
The fixing holes for the wall-mounting bracket should now be drilled
and plugged, an appropriate type and quantity of fixing should be used
to ensure that the bracket is mounted securely.
9
Easi-Flo
2.60
3.60
6 + 6
20
200
1.0 metre (60/100)
1.5 metre (60/100)
Min-Max length
(dimension 'X')
350-490 mm
UM
mt
mt
mt
mt
mt
833 mm
750 mm
1500 mm
220mm
N/A
N/A
Hide quick links:
Advertisement
Table of Contents
