Download Print this page
KOCOM DS-4M Operating Manual

KOCOM DS-4M Operating Manual

Multiple out door panel
Hide thumbs Also See for DS-4M:

Advertisement

Quick Links

Warranty
To receive after-Sale service, have the following
ready when you contact our branches
1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at
which you can be contacted.
Warranty Card
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS
◉ KOCOM Warranties the original purchaser of this product
as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM
will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
This manual is based on the date as shown in the right and specifications are subject to change without
notice for quality improvement.
DS-4M 04.06
MULTIPLE OUT DOOR PANEL
DS-4M OPERATING MANUAL
DS-4M
Thank you very much
for purchasing KOCOM
multiple interphone.
please read this manual
thoroughly to ensure
correct usage, before
operating

Advertisement

loading
Need help?

Need help?

Do you have a question about the DS-4M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KOCOM DS-4M

  • Page 1 1) This product is produced under strict quality control and inspection procedures. 2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge.
  • Page 2 You can make Pick-up the hand-set and press NO.1 button a call pressing ※ When using DS-4M with KIP-611PG or KIP-605PG it should be No.1 in DIP switch. for conversation with DS-4M call button. So KIP-611PG or KIP-605PG can not be set as No.1 in dip switch.