Ceraphant PTP31B, PTP33B
Navigation
Description
User entry
Factory setting
Note
Endress+Hauser
EF → ADM → LCK
Use this function to enter the code (which was defined in the COD parameter) to enable
configuration.
Keys are evaluated but parameters are read only. The parameters can only be changed
after unlocking.
If an attempt is made to write to a parameter, a prompt for the device access code appears.
To unlock, enter the user-defined device access code (which was specified in the COD
parameter).
To unlock: Enter the access code.
0000
The access code is "0000" in the order configuration. Another access code can be defined in
the parameter "COD".
Operation options
25
Need help?
Do you have a question about the Ceraphant PTP31B and is the answer not in the manual?