Disassembly For Repair - Kenwood TKR-D710 Service Manual

TKR-D710
1. How to Remove the Panel Assy (ABS)
Note: You can remove the panel assembly (ABS) without
removing the top panel (A62-1148-03).
1. To remove the panel (TX-RX, b ), loosen the 6 screws
( a ).
2. To remove the panel assembly (Front, d ), loosen the 6
screws ( c ).
3. The panel assembly (ABS) is securely fastened by 4 tabs
( d ) on the top and bottom. You can remove the panel
assembly by pulling to the front while you are pulling up
the tabs.
10

DISASSEMBLY FOR REPAIR