Kenwood TKR-D710 Service Manual page 58

TKR-D710
Transmitter Section
Item Condition
1. High Trans- FPU Test mode
mit Power 1) Adjust Item: [High Transmit
Limit Adjust Power Limit]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
2. High Trans- FPU Test mode
mit Power 1) Adjust Item: [High Transmit
Adjust Power]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
3. Low Trans- FPU Test mode
mit Power 1) Adjust Item: [Low Transmit
Limit Adjust Power Limit]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
4. Low Trans- FPU Test mode
mit Power 1) Adjust Item: [Low Transmit
Adjust Power]
Frequency: [Low], [Low'],
[Center], [High'], [High]
Press [Transmit] button.
5. RF Power FPU Test mode
Down 1) Adjust Item: [RF Power
Detection Down Detection (High)]
Adjust [High] Frequency: Desired
Frequency
Press [Transmit] button.
6. RF Power FPU Test mode
Down 1) Adjust Item: [RF Power
Detection Down Detection (Low)]
Adjust [Low] Frequency: Desired
Frequency
Press [Transmit] button.
7 . Maximum FPU Test mode
Deviation 1) Adjust Item: [Maximum De-
Adjust viation (DMR Narrow)]
[DMR Nar-
row]
8. Maximum FPU Test mode
Deviation 1) Adjust Item: [Maximum De-
Adjust viation (Analog Wide)]
[Analog
Wide]
58
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
Power meter Rear TX ANT
Adjustment
Parts Method
PC 53W±1.5W Press [Apply] button to store
ADJ the adjustment value.
50W±0.5W
28W±1.5W
25W±0.5W
20W±0.5W
10W±0.5W
PC Write the value as Press [Apply] button to store
ADJ followings (typical the adjustment value.
value)
[Maximum Deviation
(DMR Narrow)] =
144
Write the value as
followings (typical
value)
[Maximum Deviation
(Analog Wide)] =
143
Specifi cations / Remarks