Kenwood TKR-D710 Service Manual page 61

Item Condition
18. Test Tone FPU Test mode
Deviation 1) Adjust Item: [Test Tone De-
adjust viation (Analog Wide)]
[Analog Connect the Deviation Meter
Wide] to the TX ANT end via the ATT.
Deviation Meter setting
LPF: 15kHz
HPF: OFF
De-emphasis: OFF
Press [Transmit] button.
19. Test Tone FPU Test mode
Deviation 1) Adjust Item: [Test Tone De-
adjust viation (Analog Narrow)]
[Analog Nar- Connect the Deviation Meter
row] to the TX ANT end via the ATT.
Deviation Meter setting
LPF: 15kHz
HPF: OFF
De-emphasis: OFF
Press [Transmit] button.
20. CW ID FPU Test mode
Deviation 1) Adjust Item: [CW ID Devia-
adjust tion (Analog Wide)]
[Analog Connect the Deviation Meter
Wide] to the TX ANT end via the ATT.
Deviation Meter setting
LPF: 15kHz
HPF: OFF
De-emphasis: OFF
Press [Transmit] button.
21. CW ID FPU Test mode
Deviation 1) Adjust Item: [CW ID Devia-
adjust tion (Analog Narrow)]
[Analog Nar- Connect the Deviation Meter
row] to the TX ANT end via the ATT.
Deviation Meter setting
LPF: 15kHz
HPF: OFF
De-emphasis: OFF
Press [Transmit] button.
22. Courtesy FPU Test mode
Tone Devia- 1) Adjust Item: [Courtesy Tone
tion adjust Deviation (Analog Wide)]
[Analog Connect the Deviation Meter
Wide] to the TX ANT end via the ATT.
Deviation Meter setting
LPF: 15kHz
HPF: OFF
De-emphasis: OFF
Press [Transmit] button.
23. Courtesy FPU Test mode
Tone Devia- 1) Adjust Item: [Courtesy Tone
tion adjust Deviation (Analog Narrow)]
[Analog Nar- Connect the Deviation Meter
row] to the TX ANT end via the ATT.
Deviation Meter setting
LPF: 15kHz
HPF: OFF
De-emphasis: OFF
Press [Transmit] button.
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
Deviation Rear TX ANT
meter
Oscilloscope
TKR-D710
Adjustment
Parts Method
PC 3.0kHz Deviation ±0.1kHz
ADJ
Press [Apply] button to store
the adjustment value.
1.5kHz Deviation ±0.05kHz
Press [Apply] button to store
the adjustment value.
2.0kHz Deviation ±0.1kHz
Press [Apply] button to store
the adjustment value.
1.0kHz Deviation ±0.05kHz
Press [Apply] button to store
the adjustment value.
1.0kHz Deviation ±0.05kHz
Press [Apply] button to store
the adjustment value.
0.5kHz Deviation ±0.05kHz
Press [Apply] button to store
the adjustment value.
Specifi cations / Remarks
61