Disassem Bly For Repair - Kenwood TKR-740 Service Manual

TKR-740
Cooling Fan installation for the TKR-740(E)
1. Cooling Fan (Front side)
(1) Secure the fan to the fan enclosure w ith the 2 supplied
screw s.
Fan enclosure
(2) Attach the fan enclosure to the front of the TKR-740(E)
heatsink so that the enclosure tabs are securely mounted
to the heatsink chassis.
24
DISASSEMBL Y FOR REPAIR
Cooling fan
Chassis (Front side)
(3)Guide the fan cable along w ith the front of the chassis and
through the cable slot.
(4)Hook the fan cable around the cable holder, then plug the
connector into the CN104 on the TX unit (A/3).
Fan cable
CN104
Cable holder
TX UNIT
(A/3)
CN104