Garmin Plotter And Transducer; Engine Controls And Instrumentation - Ockelbo B21 CAB Owner's Manual

WARNING
The bilge pumping system is not designed for damage control.
CAUTION
Check the function of the bilge pump at regular intervals. Empty the bilge by using the spring-
loaded switch located on the switch panel every time before boat use, and make sure the
pump works. Test the manual pump at least every season. A bilge pump failure could
potentially cause the boat to sink if there is an unnoticed water leakage.
For complete instructions on operation and maintenance, we refer to the separate OEM
owner's manual that was developed specifically for this equipment. It is provided with the
Ockelbo document bag.
4.5 G
ARMIN PLOTTER AND TRANSDUCER
The boat comes as standard with a multi-function model Garmin GPSMap 722XS (as an
option there is also the model 922XS). Both models contain a great deal of functionality.
They are recessed into the boat's instrument panel.
They support both wireless and
such as radar and mobile app to be connected. Depending on the engine selection, the
engine data, as well as fuel level and other equipment can also be connected. If you have
any doubts about the configuration of your boat, please read the Garmin manual or
contact your dealer.
The depth and water temperature sensors (transducers) are mounted at the bottom of
the transom. Be careful not to damage it when the boat is lifted or pulled up on a trailer,
placed on a cradle or at the very shallow water. The sensor sits on an adjustable holder
for easy adjustment; no tools are needed. Adjustment may be required in both height
and angle, depending on the engine selection and load in the boat. Adjustment need is
indicated by a lost depth indication (no value is visible in the depth field).
Your reseller can also help you if needed because there are many features that can be
customised. When the device is not in use, the protective cover is to be mounted on the
front of the unit.
For complete instructions on operation and maintenance, we refer to the separate OEM
owner's manual that was developed specifically for this equipment. It is provided with the
Ockelbo document bag.
4.6 E
NGINE CONTROLS AND INSTRUMENTATION
The engine controls and the instrumentation will vary depending on the engine brand
and model; thus it is covered by the engine owner's manual. Chapter 7, figure 2 shows
the typical locations of controls and instruments.
4. SYSTEMS & COMPONENTS__PAGE 40
NMEA
network connection, allowing a range of options