Jacuzzi J-300 Installation Manual And Use & Maintenance page 49

USB
AUX
(purchased separately)
Note: The DRM (Digital Rights Management) Files cannot be played
on this deck. Personal files (MP3, WMA, iTunes or AAC) can be played
as long as they are not DRM encrypted.
Operating USB/MP3/Apple device
• Turn power "ON" to the stereo unit. Turn power "ON" to the
remote.
• The LCD screen on the remote will display the following:
"Welcome, " "USB, " "Load, " "Apple" (final display will vary de-
pending on the device connected). All functions are per-
formed through the remote.
• While the music is playing the remote screen will display and
continually scroll through the following: Artist, Album, Song
and Track information.
• For operational functions refer to the "External Media Device
Playback" section.
Operating the USB drive:
• Plug in your USB device into the "USB" connection on the
stereo.
• Turn power "ON" to the stereo unit and the stereo remote.
• The LCD screen on the remote will display the following:
"Welcome, " "USB, " "Load, " "TOL XX" (final display will vary de-
pending on the whether the USB holds folders or files). All
functions are performed through the remote.
• While the music is playing the remote screen will display and
continually scroll through the following: Title, Song, Artist,
Album, Dir, Music and Track information.
• For operational functions refer to the "External Media Device
Playback" section.
Connecting Your Auxiliary Player Using the 3.5 mm Cable:
• Plug one end of the cable to "Aux" connection on the stereo.
• Plug the other end of the cable into the phone jack connec-
tion on the Apple device/MP3 Player.
• Press the Mode button on the remote to "AUX IN.
• All playback operations are conducted via the Auxiliary Play-
er. The stereo remote functions do not work on the external
Auxiliary Player (except volume control).
USB USB
AUX AUX
Connecting Your Bluetooth Device:
• Turn power "ON" to the stereo unit.
• From your Bluetooth device, make sure the Bluetooth set-
ting is "ON. "
• Follow the pairing instructions for your Bluetooth device
and connect to the "BLUEWAVE" device that appears on your
screen.
USB
AUX
• If asked for a password, enter the code "0000. "
• The remote LCD screen will display, "BT AUDIO" if the process
ACCESSORY CONNECTED
was successful.
Operating Your Bluetooth Device:
• Press the seek up or down buttons to scroll through the
tracks (on the remote).
• Press the volume up or down buttons to adjust volume level
between 0 to 30 (on the remote).
• Any other playback operations are conducted via the Blue-
tooth device.
Wireless Remote Battery Replacement Procedure
OPEN
OPEN CLOSED
OPEN
OPEN
OPEN CLOSED
Note: Remote unit is water resistant not waterproof. Although it is
designed for use while in the spa, it should never be left in the spa
while the cover is on and spa is not in use.
The remote should be stored in a dry place, away from sources of
heat, as well as frost and bad weather.
BLUEWAVE® Spa Stereo System Specifications
Power supply: .................................................................. 10.7-14.4V DC
Tuner
49
- Turn the remote unit over and locate the bat-
tery door (Figure A).
CLOSED
- Rotate the battery door, with a coin, counter-
clockwise to the Open position. When the door
is unlocked it will pop up slightly.
- Remove battery door by lifting the door up-
ward.
CLOSED
- Replace the battery with an equivalent.
CLOSED
- Reinstall the battery cover, using the coin ro-
tate the door to the Close position.