Mitsubishi SRK20ZSX-W Technical Manual page 126

Setting ＆ display item
IU address
4 Service & Maintenance
[Service password]
Next service date
Operation data
Error display
Error history
Display anomaly data
Erase anomaly data
Reset periodical check
Saving IU settings
Special settings
Indoor unit capacity display
8.Contact company
9.Inspection
Confirmation of Inspection
10.PC connection
USB connection
◆ Listed items may not function depending on the specifications of indoor and outdoor units which are combined.
*1 It supports only following functions.
Operation output / Heating output / Compressor ON output / Inspection (Error) output / Cooling output / Fan operation output 1 / Fan operation output 2 / Fan operation output 3 / Defrost/oil return output
Max 16 indoor units can be connected to one remote control, and all address No. of the connected indoor units can be displayed.
・ The indoor unit conforming to the address No. can be identified by selecting the address No. and tapping [Check] to
operate the indoor fan.
The [Next service date] can be registered.
・The [Next service date] and [Company information] is displayed on the message screen.
The [Operation data] for indoor unit and outdoor unit can be displayed.
The error history can be displayed.
The operation data just before the latest error stop can be displayed.
Anomaly operation data can be erased.
The timer for the periodical check can be reset.
The I/U settings memorized in the indoor PCB connected to the remote control can be saved in the memory of the remote control.
[Erase IU address] [CPU reset] [Restore of default setting] [Touch panel calibration]
Address No. and capacities of indoor units connected to the remote control are displayed.
Shows registered [Contact company] and [Contact phone].
This is displayed when any error occurs.
Weekly timer setting and etc., can be set from PC.
124
- -
Description
'18 • SRK-T-234
RC-EX3 RC-E5
○ −
○ −
○ ○
○
△
○ −
○ △
○ −
○ −
○ −
○ −