Ring - Makita BHR240 Technical Information

W
iring diagram
Fig. D-2
Connecting terminal of M2 side
can be inflected toward the direction
designated with arrow in order to
avoid pinching of lead wire,
if it is necessary.
Terminal M2
Rib C
Wire Connecting Portion
Flag Connector
Switch
Rib B
Terminal
The flag connector has to be so connected,
that its wire connecting portion is located over
the mark of + - poles.
Fix the End bell's lead wires
(black and red) with lead
wire holder.
Route he following lead wire between rib B and rib C.
* Switch's lead wires (black and red)
* FET's lead wires (black, blue, yellow)
Mark of Poles
Terminal
P 14 / 14
Boss
Route End bell's lead wires
(black) and (red) between
boss and rib A.
Rib A
Endbell Comp.
Heat Sink
FET
Bundle the following lead wires
with band.
* FET's lead wires (black) (blue)
(yellow)
* Switch's lead wire (red)
Fix the FET's lead wires (black,
blue and yellow) with lead wire
holder.