Using The Appliance; Understanding The Air Quality Light; Switching On And Off; Changing The Auto Mode Setting - Philips AC3259 User Manual

4 Using the
appliance
Understanding the air
quality light
PM2.5 Air quality
level light color
≤12
Blue
13-35 Blue-Purple
36-55 Purple-Red
>55 Red
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.

Switching on and off

1
Put the plug of the appliance in the
power socket.
2
Touch to switch on the
appliance (fig.j).
» The appliance operates under
the auto mode by default.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» After measuring the particle
matters in the air, the
icon and the PM2.5 level are
displayed on the screen. (fig.k).
3
Touch and hold
switch off the appliance.
Air quality
level
Good
Fair
Poor
Very poor
for 3 seconds to
Note
• After the appliance is switched off by
the on/off button
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
Changing the Auto mode
setting
You can choose the Pollution mode
( ), the Allergen mode (
Bacteria/Virus mode (
Pollution mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as PM2.5.
•
Touch the Auto mode button
select the Pollution mode (fig.l).
» Auto(A) and
screen.
Allergen mode
The specially designed Allergen mode
can effectively remove common
allergens such as pollen and pet dander.
• Touch the Auto mode button
select the Allergen mode (fig.m).
» Auto(A) and
screen.
, if the plug is still
) and the
).
to
display on the
to
display on the
EN 7