Jensen CD-565 User Manual page 10

TIPS FOR BEST RADIO RECEPTION
If a stereo broadcast program is being received, the FM STEREO INDCATOR will automatically
light.
Always keep the FM TELESCOPIC ANTENNA fully extended for best performance.
If the FM reception is weak, try rotating the antenna or reposition the unit closer to a window until
the reception improves.
SETTING THE RADIO STATION PRESETS
The unit allows you to store up to 20 FM stations for easy recall at any time.
1. Press the SOURCE button repeatedly to select FM radio mode. The "FM" indicator and
frequency will show on the LCD display.
2. Tune to the radio station you want to store in memory.
3. Tap the PROG/MEM button. The preset channel number "P01" will begin flashing for 10
seconds on the LCD DISPLAY.
4. Tap the M– button or M+ / RANDOM button to select the preset location (P01 – P20).
5. Tap the PROG/MEM button to confirm.
6. Repeat steps 2 - 5 above to fill the remaining 19 memory locations if needed.
RECALLING THE PRESET RADIO STATIONS
In FM mode, tap the M– button or M+ / RANDOM button to select the preset channel.
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial CDs. They
will also read self-compiled CD-R/CD-RW discs but it may take up to 10 seconds for playback
to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or
the compatibility of the CD compilation software. Manufacturer is not responsible for the
playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
1. Press the POWER
2. Press the SOURCE button repeatedly to select CD mode. The "CD" indicator will light and
the display will show "- - -" briefly on the display.
3. If no CD is loaded in the CD compartment, the LCD display will change to show "
4. Open the CD door and carefully place an audio CD onto the spindle in the CD
compartment and close the CD door. Make sure the CD label is facing outwards.
5. The player will start reading the TOC (table of contents) of the disc, and the total number
of tracks on the CD will appear on the LCD DISPLAY after a few seconds.
6. Tap the PLAY/PAUSE
7. Adjust the VOLUME CONTROL to obtain the desired sound.
8. To pause, tap the PLAY/PAUSE
PLAY/PAUSE / PAIR button again.
9. To select a specific track on the CD, slightly rotate the TUNING CONTROL KNOB
counterclockwise (TUN-
10. Rotate the TUNING CONTROL KNOB counterclockwise (TUN-
or clockwise (TUN+
selected.
11. To locate a particular section of a song within a track playing, rotate and hold the TUNING
CONTROL KNOB counterclockwise to search BACK within the track playing, or
clockwise to search FORWARD within the track playing.
CD OPERATION
button to turn on the unit power.
/ PAIR button to start to playing the CD.
/ PAIR button. To resume playing, tap the
) or clockwise (TUN+
) to go UP a track.The LCD Display will indicate the track
E9
) until you hear a "click" sound
) to go DOWN a track,
n
o".
.