Sony Cyber-shot DSC-G1 Handbook page 116

Warning indicators and messages
Internal memory formatting error
Memory Stick formatting error
• Format the media again (pages 57 and
59).
Memory Stick locked
You are using the "Memory Stick Duo"
•
with the write-protect switch, and the
switch is set to the LOCK position. Set
the switch to the recording position
(page 120).
No memory space in internal
memory
No memory space on Memory Stick
Delete unnecessary images or files
•
(page 23).
Not enough space in internal
memory to store album images
Delete unnecessary data in the internal
•
memory. This is because the camera
records Album Images in the internal
memory even when you use a "Memory
Stick Duo".
Read only memory
Your camera cannot record or delete
•
images on this "Memory Stick Duo".
No file
No playable images have been recorded
•
in the internal memory.
Folder error
A folder with the same first three digit
•
number already exists on the "Memory
Stick Duo" (for example: 123MSDCF
and 123ABCDE). Select another folder,
or create a new folder (pages 57, 58).
116
Cannot create more folders
• The folder with a name beginning with
"999" exists on the "Memory Stick
Duo". You cannot create any folders if
this is the case.
Cannot record
The camera cannot record images in the
•
selected folder. Select a different folder
(page 58).
File error
An error occurred while the image or
•
music file was playing back.
File protect
Release the protection (page 48).
•
Image size over
You are playing back an image of a size
•
that cannot be played back on your
camera.
Invalid operation
You are trying to play back or edit a file
•
that is not compatible with the camera.
(Vibration warning indicator)
Camera shake may occur due to
•
insufficient light. Use the flash, turn on
the anti-blur function, or mount the
camera on a tripod to secure the camera.
Check other device
[USB Connect] is set to [PictBridge],
•
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
The connection is not established.
•
Disconnect and connect the USB cable
again. If an error message is indicated
on the printer, refer to the operating
instructions supplied with the printer.