Tru-Test EC-10 User Manual page 2

Datamars recommends the use of Jenquip Pasture Management Software. This software
is required in order to download data from the plate meter. It takes the information from
your farm walk and produces ready-to-use reports. Jenquip Pasture Management
Software is supplied with your plate meter on a USB stick. For all support, phone
0800 AGDATA (0800 243282).
Computer requirements: Windows XP or later.
© 2018-2019 Datamars Limited
All product names and brand names in this document are trademarks or registered trademarks of their respective
holders.
No part of this publication may be photocopied, reproduced, stored in a retrieval system, or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of
Datamars Limited. Product specifications may change without prior notice.
For more information on other quality Datamars brands and products, visit www.datamars.com
Datamars Limited
25 Carbine Road
Mt Wellington
Auckland 1060
New Zealand
Postal address:
P O Box 51078
Pakuranga
Auckland 2140
New Zealand
Datamars Limited, 2019. All rights reserved.
832993 Issue 2 05/2019