Tru-Test EC-10 User Manual page 15

2 The "add" number is 4 digits long and can range from 0-9999. This must be
entered first. Starting with the first digit, press the "Up" arrow to change this
digit to a value from 0-9. Press the "Enter" button when this is correct.
Repeat the process until all four digits have been entered. The display then
changes to the "multiply" number, which has only 3 figures.
3 The "multiply" number can range from 0-199. The first digit will appear as 0
or 1. Press the "Up" arrow button to change this digit to the desired value
from 0 - 9. Press the "Enter" button when it is correct.
would be entered as 0850. The next digit displayed will be whatever figure is
part of the old formula. Use the "Up" arrow to change it, or just press
"Enter" if it is correct. Repeat this process until all 4 digits have been entered.
The display then changes to the "multiply" number, which has only 3 figures.
4 The "multiply" number can range from 0-199. The first digit will appear as 0
or 1. Press the "Up" arrow button to change this digit to the desired value of
0 or 1. Press the "Enter" button when it is correct and the next digit will
appear. The last two digits can have values from 0-9. Repeat this process until
all digits are entered and press the "Enter" button for the display to return to
its normal state. Your new formula is now active and saved to memory.
As manufacturers we can only give broad guidelines with regard to the formula to
use. For advice on creating custom formulas optimised for your particular farm and
circumstances, contact 0800 AGDATA (0800 243282).
Place the plate meter squarely on the ground. The plate will "rise" as it rests on the
grass, giving a reading of grass height (½ cm increments) on the bottom counter.
At each measurement, click the top (sample) counter to record the total number of
samples taken.
Note:
850 for example
11