Figure; Safety And Instructional Decals - Toro Power Clear 721 R Operator's Manual

Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
1. Cutting/dismemberment hazards of hand or foot, impeller
and auger—do not place your hand in the chute; remove
the ignition key and read the instructions before servicing
or performing maintenance.
94-2577
115-5660
133-8061
decal94-2577 1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—shut off
the engine and wait for
the auger to stop before
leaving the machine.
3. Thrown object
hazard—keep bystanders
a safe distance away from
the machine.
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch on
decal115-5660
1. Warning—read the
Operator's Manual.
decal133-8061
2. Cutting/dismemberment
hazard, impeller—shut off
the engine and wait for
the auger to stop before
leaving the machine.
3. Thrown object
hazard—keep bystanders
a safe distance away from
the machine.
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch on
3
117-9102 (Model 38741 only)
Order Part No. 117-6036
6. Engine switch off
7. Primer
8. Push the primer 3 times to
prime the engine.
9. Read the Operator's
Manual before checking
the engine-oil level.
117-9103 (Model 38742 only)
Order Part No. 117-6046
6. Engine switch off
7. Primer
8. Push the primer 3 times to
prime the engine.
9. Read the Operator's
Manual before checking
the engine-oil level.
10. Plug the machine in to
power the electric starter.
decal117-9102
decal117-9103