Action Overlay Mode; Underwater Mode - Kyocera DuraForce PRO 2 User Manual

Tap to record a video. Tap
recording, tap
Tap Thumbnail to view the image you've just taken or recorded.
5.

Action Overlay Mode

You can take a photo or record a video with additional information such as elapsed time, travel
distance, speed, G-force, altitude, date and time, or route.
WARNING: Do not operate the app while driving or riding a bicycle or motorcycle. If
necessary, stop moving first and operate the app with careful attention to your
safety.
► From the Home screen, tap
NOTE: Action Overlay mode uses location information.
the Location settings if they are disabled. High accuracy must be selected under
the Location settings. Read the onscreen information and follow the instructions
to proceed.
Action Overlay Mode Settings
You can configure the Action Overlay mode settings by tapping
available:
●
Altitude settings: Select Feet (ft) or Meter (m). Tap Altitude correction to set the
desired altitude.
●
Speedometer settings: Select Mile (mi) with mph, Kilometer (km) with km/h or
Nautical mile (nm) with knots for Units with its Max speed.
●
Select display data: Check or uncheck the checkbox for Speedometer, Elapsed time,
Distance, Altitude, G-force, Date & time, and Route.
●
Screen rotation: Switch Screen rotation On and Off.
●
Screen lock: Switch Screen lock On and Off.
NOTE: Screen will lock after recording begins to avoid accidental operations.

Underwater Mode

You can take a picture or record video also in the water. Your phone is immersible in water for
up to 30 minutes at a depth not exceeding two meters (about 6.56 ft.).
WARNING: Avoid using phone in saltwater. It is highly corrosive and can damage internal
components and degrade the audio performance over time.
or
.
>
to pause or resume recording. To stop
> Action Overlay.
ou will be prompted to enable
Y
.
62
The following options are
Camera and Camcorder