Call Timer; Power Key Ends Call - Kyocera DuraForce PRO 2 User Manual

Your phone is compatible with select TTY devices. Please check with the manufacturer of your
TTY device to ensure that it supports digital wireless transmission. Your phone and TTY device
will connect using a special cable that plugs into your phone's headset jack. If this cable was not
provided with your TTY device, contact your TTY device manufacturer to purchase the
connector cable.
To turn TTY Mode on or off:
1. From the Home screen, tap
2. Tap TTY Full, TTY HCO, or TTY VCO to turn TTY mode on.
– or –
Tap TTY Off to turn TTY mode off.
NOTE: When enabled, TTY mode may impair the audio quality of non-TTY devices
connected to the headset jack.
WARNING: 911 Emergency Calling
It is recommended that TTY users make emergency calls by other means,
including Telecommunications Relay Services (TRS), analog cellular, and
landline communications. Wireless TTY calls to 911 may be corrupted when
received by public safety answering points (PSAPs), rendering some
communications unintelligible. The problem encountered appears related to
TTY equipment or software used by PSAPs. This matter has been brought to
the attention of the FCC, and the wireless industry and the PSAP community
are currently working to resolve this.

Call Timer

To view the call timer and call duration:
1. From the Home screen, tap
2. Tap Call timer.
For other Call settings menus listed below, you can simply set it to on or off by tapping the
ON/OFF icon.

Power Key Ends Call

Set your phone to end call by pressing the Power button.
NOTE: This function does not work for incoming calls.
> > Call settings > TTY mode.
> > Call settings.
36 Phone Calls